Chlorine Sensors & Transmitters

Products for reliable measurement of chlorine and bromine-based disinfectants.

1 - 25 of 25 Products
Digital Total Chlorine Sensor Memosens CCS53E
Endress+Hauser
Digital total chlorine sensor Memosens CCS53E
Extended Extended
Request Information
Zero-Point Gel COY8
Endress+Hauser
Zero_point_gel_COY8_1.png
Request Information
Analog Free Chlorine Sensor Memosens CCS51
Endress+Hauser
Analog free chlorine sensor CCS51
Request Information
Digital Chlorine Dioxide Sensor Memosens CCS50E
Endress+Hauser
Digital chlorine dioxide sensor Memosens CCS50E
Extended Extended
Request Information
Digital Service Tool Memocheck CYP02E
Endress+Hauser
Digital service tool Memocheck CYP02E
Request Information
Flow Assembly for Multi-Parameter Measurements Flowfit CYA27
Endress+Hauser
Flow assembly for multi-parameter measurements Flowfit CYA27
Request Information
4-Channel Transmitter Liquiline CM444
Endress+Hauser
CM44_pH.png
Extended Extended
Request Information
Liquiline Edge Module CYY7
Endress+Hauser
Liquiline Edge Module CYY7
Extended Extended
Request Information
1-/2-Channel Transmitter Liquiline CM442R
Endress+Hauser
CM442R.png
Extended Extended
Request Information
4-Channel Transmitter Liquiline CM444R
Endress+Hauser
CM444R.png
Extended Extended
Request Information
1-/2-Channel Transmitter Liquiline CM442
Endress+Hauser
CM44_pH.png
Extended Extended
Request Information
Immersion Assembly Flexdip CYA112
Endress+Hauser
CYA112_Rendering_2.png
Request Information
Analog Chlorine Dioxide Sensor Memosens CCS50
Endress+Hauser
Analog chlorine dioxide sensor CCS50
Request Information
Disinfection Transmitter Liquisys CCM223
Endress+Hauser
Disinfection transmitter Liquisys CCM223
Request Information
Digital Extension Cable Memosens CYK11
Endress+Hauser
Digital extension cable CYK11
Request Information
Multichannel Transmitter Liquiline CM44P
Endress+Hauser
Liquiline_CM44P_AU.png
Extended Extended
Request Information
Digital Service and Qualification Tool Memocheck Sim CYP03D
Endress+Hauser
Digital service and qualification tool Memocheck Sim CYP03D
Request Information
Digital Measuring Cable Memosens CYK10
Endress+Hauser
Digital measuring cable CYK10
Request Information
8-Channel Transmitter Liquiline CM448
Endress+Hauser
CM44_pH.png
Extended Extended
Request Information
8-Channel Transmitter Liquiline CM448R
Endress+Hauser
CM448R.png
Extended Extended
Request Information
Digital Ozone Sensor Memosens CCS58E
Endress+Hauser
Digital ozone sensor Memosens CCS58E
Extended Extended
Request Information
Digital Free Bromine Sensor Memosens CCS55E
Endress+Hauser
Digital free bromine sensor Memosens CCS55E
Extended Extended
Request Information
Disinfection Transmitter Liquisys CCM253
Endress+Hauser
Disinfection transmitter Liquisys CCM253
Request Information
Digital Measuring Cable CYK20
Endress+Hauser
CYK20_Memosens cable_nonEx.png
Request Information
Digital Free Chlorine Sensor Memosens CCS51E
Endress+Hauser
Digital free chlorine sensor Memosens CCS51E
Extended Extended
Request Information

Chlorine Sensors & Transmitters

Chlorine measurement systems combine dedicated sensors and transmitters to monitor residual disinfectants in real time. Depending on the disinfectant strategy and water matrix, these instruments measure free chlorine, total chlorine, chlorine dioxide, ozone, and free bromine to maintain effective disinfection while limiting excessive dosing.

Many disinfectant sensors use an amperometric, membrane-covered measuring cell. The disinfectant diffuses through the membrane and is reduced at the working electrode, generating a current proportional to concentration; for free chlorine, pH-dependent speciation is compensated by parallel pH measurement and transmitter correction to maintain accuracy across operating conditions.

Continuous residual monitoring improves control of dosing systems and stabilizes disinfection outcomes, particularly where contact time, temperature, and demand fluctuate. It also supports regulatory compliance and mitigates risks associated with over-application of oxidants, including downstream impacts on materials, processes, and discharge quality.

Applications span drinking-water treatment, process and reuse water, pools, and seawater systems. Chlorine dioxide is often applied where pH independence and reduced corrosivity are beneficial (such as cooling systems, wash water, and certain desalination pretreatment steps), while total chlorine is commonly used to assess residual disinfectant status in treated wastewater and reuse streams.

Design typically centers on correct disinfectant selection, appropriate flow assembly/sample presentation, and maintenance planning for membrane/electrolyte components. Modular measuring points and preassembled monitoring panels can reduce installation effort while still supporting multichannel or multiparameter architectures where disinfection control must be coordinated with pH and other water-quality variables.

Engineered Equipment Company, a leading supplier of specialized industrial equipment.